No Products in the Cart
Ceramic Lite is an easy to use, durable, slick, hydrophobic paint coating providing a high level of gloss to enhance any vehicle. It is extremely simple to apply with superb durability proven by 60,000+ real world client vehicle installations.
FEYNLAB CERAMIC LITE is the legacy technology of our chief FEYNLAB chemist who has innovated automotive ceramic coatings since 1996. This coating has been continually improved and is now available to the public exclusively as FEYNLAB CERAMIC LITE.
Ceramic Lite is classified as our entry level coating due its extreme user friendly application method. ‘Lite’ designates the coating contains a lower solids content than our traditional offerings. However, it still packs quite a punch in terms of durability and performance.
FEYNLAB engineers, manufacturers, bottles, and ships all products in-house in the USA. Therefore, we can offer a consumer grade product that rivals many other pro offerings at a reasonable cost since we have cut out the price inflation of the traditional two and three tier distribution models.
CERAMIC LITE Benefits
Durability & Approved Surfaces
Durability: 1+ Year(s)
APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
Unopened – 1 year. Opened – Use within 1-2 months. ALWAYS keep cap on bottle when not in use.
30ml (1oz) FEYNLAB CERAMIC LITE (enough for 1 mid-sized vehicle)
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.
Thoroughly clean vehicle surface using FEYNLAB PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to the desired level, remove all polish oils using FEYNLAB PANEL PREP to ensure optimal bonding and durability of the coating.
Prior to application, place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment. Have plenty (6 or more) new microfiber towels, 2 or 3 microfiber applicators on hand BEFORE application.
Once the vehicle is prepared, it is strongly recommended to tape off and protect all unapproved surfaces. This minimises the risk of etching by the solvents in FEYNLAB CERAMIC LITE on unapproved surfaces. Avoid these surfaces with CERAMIC LITE and wipe off immediately if any product accidentally finds these surfaces.
Shake CERAMIC LITE vigorously for 2 min before use. Open the bottle and allow the coating 1 min of air exposure.
CERAMIC LITE Application Instructions
Recommended Maximum Area of Application:
ENTIRE vehicle, then wipe off in same pattern as application.
Note: If using CERAMIC LITE on black textured plastics, perform a simple wipe after 1-2 min to ensure even application and wipe clear if you see any residue or uneven areas.
Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, then later when the coating has setup.
Although one layer of CERAMIC LITE is sufficient to achieve the one-year durability on clear-coated painted surfaces, another coat may be applied to any area to gain additional thickness (such as the hood or front bumper).
To layer CERAMIC LITE, wait 1-3 hours before applying a second layer. DO NOT wait longer than 3 hours after first layer or cloudiness will result.
Infrared Curing (Optional)
Bake each panel with an IR lamp to reach a surface temperature of 60°C (140°F) for 15min at a distance of ~ 30-36″ from the panel.
Post Application Instructions
All FEYNLAB Coatings are subject to different dwell and curing time windows due to humidity and temperature conditions. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher then consider lessening the recommended dwell and wipe times for the coating.
Additionally moving air will decrease coating dwell times for areas it contacts. Therefore, it is recommended to stop all moving air as much as possible during coating applications to ensure consistency for all portions of the vehicle.
Coatings are best applied in temperature controlled environments of 10°C-30°C (50°F-85°F), with humidity as low as possible.