IODETAIL 11L Resin Vessel - Water Filter

Are you sick of water spots on your car? Or need to wash your car during the day in direct sunlight? The IODETAIL Resin Vessel is the perfect solution.

• 11 Litre Reinforced High Pressure Long Life Resin Vessel
• Supplied with no fuss Clunk Click Hose Fittings
• Can be supplied with or without Indion virgin MB-151 resin which is designed for hard water areas

Our recommendation is to use the IODETAIL Resin Vessel during the final rinse to ensure you get the most value from your resin.

We've chosen to fill our resin vessels with Indion virgin MB-151 resin which is specifically formulated for hard water areas, meaning your resin will last longer!

How do I use one?

Fit our resin vessel in between your normal hose and water source or between your jetwash and water source, we suggest using it only for the final rinse, thus meaning your resin last longer.

How long will it last?

This is all dependant on your water hardness (ppm) with very hard water we have seen over 800+ litres before the water started spotting. If you use the resin vessel for your final rinse this will ensure you get the most value from your resin.

It's worth considering a dual vessel setup if you are filtering a large amount of water, as you'll save on resin in the long run. When your first DI vessel reaches 5ppm rather than 0ppm, attach a second vessel after it with new resin in, the resin in this second vessel has less work to do to get the water down to 0ppm, meaning your resin will last longer. 

You'll know the resin is spent you see water spots.

How do I refill it?

Once your resin is spent you see water spots, you simply empty and dispose of the resin in the vessel and replace with fresh resin which you can purchase on the link below each bag will fill your vessel 2-3 times.

Click here to if you need Indion virgin MB-151 resin refill bags

How do I store my vessel when it's not in use?

It's important the resin isn't allowed to dry out, if it drys out it will no longer function. 

Specification

• Maximum pressure: 10.5 bar (150 psi)
• Maximum temperature: 49°C (120°F)
• Minimum temperature 1°C (34°F)
• Maximum vacuum: 127 mm Hg (5" Hg)
• Vessel approved for water filtration use only
• Vessel must not be exposed to temperature below -29°C (-20°F)

Click here to if you need Indion virgin MB-151 resin refill bags

No discount codes can be used with this product